S&X Anti-Slip Tape with Reflective Strip
Reliable traction. Enhanced visibility.
Designed for safety on stairs, ramps, walkways, and more. The reflective stripe enhances visibility in low-light conditions, ideal for indoor and outdoor commercial, industrial, and residential use.
Backed by S&X's 25+ years of coated-abrasives expertise, every roll is engineered for reliable, long-lasting performance you can trust.
Get it right the first time — under 2 minutes
Watch Before Installation
Why watch before you install?
- Ensure proper installation for maximum safety
- Get the best performance and long-lasting results
- Avoid common mistakes and save time
Install in 4 Simple Steps
Clean & Prep
Wipe with isopropyl alcohol. Surface must be clean, dry, and free of dust or grease.
Spot Test
Test on an inconspicuous area first to confirm surface compatibility.
Measure & Cut
Cut to length with sharp scissors. Round the corners to prevent edge lifting.
Apply & Bond
Peel the release film and apply. Place the film over the grit, then press firmly with a scraper. Allow 24h to cure.
Important Precautions
-
Temp Control: Apply only when surface is at least 10°C (50°F). Pre-warm if cold.
-
Surfaces: Avoid raw wood, porous concrete, or submerged areas. Prime/seal first.
-
Removal: Heat with a hair dryer, then peel slowly to minimize adhesive residue.
Surface Guide
Why It Works
High Grip
Aggressive grit provides superior traction.
Reflective Visibility
Reflective stripe improves visibility in low light.
Durable PET Backing
Resists wear, moisture, and harsh conditions.
Strong Adhesive
Industrial-strength adhesive for lasting hold.
- Clean regularly with mild soap and water.
- Avoid harsh chemicals and solvents.
- Inspect periodically and replace if worn.
- Keep the surface clean and dry.
- Warm the tape with a heat gun or hair dryer.
- Peel back slowly at a low angle.
- Remove any residue with adhesive remover.
- Test on a small area first.
Frequently Asked Questions
1.What surfaces does it work on?
Concrete, metal, tile, sealed wood, glass, and fiber cement work best. See the Surface Guide above for details.
2.Can it be used outdoors?
Yes. The PET backing and weatherproof adhesive make it suitable for outdoor stairs, ramps, and walkways.
3.How long will it last?
Lifespan depends on traffic and conditions, typically 12-24 months in normal use. Inspect periodically and replace when worn.
4.Can it get wet?
Yes, the tape is water-resistant once installed. Make sure the surface is fully dry before applying.
5.How do I remove the tape?
Warm with a hair dryer, peel slowly at a low angle, then clean any residue with adhesive remover.
6.Does the reflective strip wear off?
The reflective material is bonded into the surface. It may dim slightly over years of heavy traffic but does not peel off in normal use.
Need More Help?
Related Products / Other Sizes
S630 Safety Yellow Anti-Slip Tape — High-Visibility Single Color
S680 Heavy-Duty Hazard Anti-Slip Tape — OSHA Yellow & Black
S640 All-Weather Anti-Slip Tape — Outdoor Heavy-Duty Industrial Gray
S610R Reflective Anti-Slip Tape — Indoor + Outdoor with Reflective Edge
More Sizes Available
Explore other widths, colors, and options.
View All Options →