Product Support Page

S&X Premium Anti-Slip Tape with 80-Grit Ultra Traction

Reliable traction. Premium-grade durability.

Engineered for the most demanding applications — high-traffic stairs, ramps, and walkways. The 80-grit ultra-aggressive surface paired with a reinforced base delivers maximum traction and long-lasting durability for indoor and outdoor use.

Backed by S&X's 25+ years of coated-abrasives expertise, every roll is engineered for reliable, long-lasting performance you can trust.

Rolls: 1"-24" × 33 / 60 ftPre-Cut: 4“/6"/8” × 24"/30"Indoor & Outdoor

Watch Installation Video

Get it right the first time — under 2 minutes

Watch Before Installation

Why watch before you install?

Ensure proper installation for maximum safety
Get the best performance and long-lasting results
Avoid common mistakes and save time

Install in 4 Simple Steps

1

Clean & Prep

Wipe with isopropyl alcohol. Surface must be clean, dry, and free of dust or grease.

2

Spot Test

Test on an inconspicuous area first to confirm surface compatibility.

3

Measure & Cut

Cut to length with sharp scissors. Round the corners to prevent edge lifting.

4

Apply & Bond

Peel the release film and apply. Place the film over the grit, then press firmly with a scraper. Allow 24h to cure.

Important Precautions

Temp Control: Apply only when surface is at least 10°C (50°F). Pre-warm if cold.
Surfaces: Avoid raw wood, porous concrete, or submerged areas. Prime/seal first.
Removal: Heat with a hair dryer, then peel slowly to minimize adhesive residue.

Surface Guide

Recommended Surfaces

Concrete

Metal

Tile

Sealed Wood

Glass

Fiber Cement

Avoid or Prepare First

Dusty Surface

Oily Surface

Wet Surface

Peeling Paint

Loose Coating

Cracked Surface

Why It Works

80-Grit Ultra Traction

Premium 80-grit aggressive surface delivers superior traction and confident footing.

Reinforced Base

Multi-layer construction stands up to high-traffic wear and heavy abrasion.

Long-Lasting Durability

Premium-grade build engineered for extended service life in tough conditions.

Weatherproof

Stands up to rain, washdowns, and outdoor conditions year-round.

Care & Maintenance

Clean regularly with mild soap and water.
Avoid harsh chemicals and solvents.
Inspect periodically and replace if worn.
Premium-grade tape lasts longer with proper care — keep clean and dry.

Safe Removal

Warm the tape with a heat gun or hair dryer.
Peel back slowly at a low angle.
Remove any residue with adhesive remover.
Test on a small area first.

Frequently Asked Questions

1.What surfaces does it work on?

Concrete, metal, tile, sealed wood, glass, and fiber cement work best. See the Surface Guide above for details.

2.Can it be used outdoors?

Yes. The reinforced base and weatherproof adhesive make S810 ideal for outdoor stairs, ramps, and walkways year-round.

3.How long will it last?

S810 is premium-grade — it typically outlasts standard 60-grit tapes. Lifespan depends on traffic load; inspect periodically and replace when grit is heavily worn.

4.Can it get wet?

Yes, S810 is water-resistant once installed. Make sure the surface is fully dry before applying.

5.How do I remove the tape?

Warm with a hair dryer, peel slowly at a low angle, then clean any residue with adhesive remover.

6.What makes S810 a premium-grade tape?

S810 upgrades from our standard 60-grit to an 80-grit aggressive surface for maximum traction, combined with a reinforced base for extended service life. Designed for high-traffic stairs, ramps, and walkways where superior performance and longevity matter most. Choose S810 over standard S610 when traction quality and longevity are the priority.